|
GSM
DIALLER. - 4 I/P, 2 O/ -PBATTERY-POWERED |
|
Makes it
possible to raise the alarm remotely using the GSM network.
Unit can be programed to call several numbers, mobile or landline
- 4 relay inputs and 2 relay outputs
- Battery-powered dialler.
- Compatible with all Daitem alarm systems.
- Can be powered via 230 V / 12 V externaltransformer (optional).
- Self-monitoring of power supply and transmission of specific message
in case of low batteries.
- 5-year battery life based on: - 1 test call / week, - 10 events
/ year.
Types of messages:
Voice messages: Default or pre-recorded by user
SMS messages: transmit text message to a mobile phone
Digital message:to a central station, supports Ademco, Contact ID
and Daitem protocols
Remote dialogue:
The unit has a build in microphone and speaker allowing users to
listen in to the protected premises
and have a two way conversation with person triggering the alarm
to facilitate false triggering
Part No: 470-29X
|
|
|
SMOKE
DETECTOR |
|
- The smoke detector
is especially designed for detecting slow-starting fires that may
smoulder
for many hours before fully breaking out.
- Its use is recommended in rooms at risk such as:
garages, lofts and any rooms containing wood, carpet, wall hangings
or wallpaper (bedrooms, etc.).
- It triggers the protection system’s general fire alarm while a
built-in buzzer and alarm make it
possible to immediately locate the smoke.
- White emergency halo lighting is triggered when smoke is detected.
Part No: 151-21X White
153-21X Brown
154-21X Grey Silver |
|
|
COMPACT
MULTICONTACT DETECTOR |
|
The multicontact detector
is used to protect the entrances to premises.
It has a magnetic normally closed (NC) contact and can also be fitted
with external contacts.
Connection terminal block for external contacts
Contact types possible:
- normally closed (NC) magnetic contacts,
- shutter/roller blind sensors,
- piezo-electric glassbreak sensors,
- shock sensors,
- pressure mats,
- other non-specific sensors.
Part No: 271-21 : White
272-21 : Brown |
|
|
EXTERNAL
UNIVERSAL TRANSMITTER |
|
The external universal transmitter has been specially
designed to operate outdoors and in difficult
climatic environments. It transmits radio information to the Daitem
protection system according
to the status of its input loop.
It thus acts as an interface:
- with all detection or control type applications,
- with applications providing protection against technical hazards,
when used in conjunction with
Daitem technical probes.
Part No: 230-21X
|
|
|
SIRENS |
|
The siren and strobe-siren
deter intruders and warn neighbours in the event of an alarm.
The site can be visually located thanks to the strobe-siren’s strobe
Sirens can be configured using the control panel keypad or hardwired
control interface remote keypad without being dismounted
A siren can be allocated to an intrusion group for selective and
independent alarm triggering
Three types of siren sounding with differenttones:
- inside intrusion sounding: to deter intruders,
- outside intrusion sounding: to warn neighbours and facilitate
site location via the flashing strobe (for strobe-siren only),
- fire sounding: to provide fire hazard warning (fixed duration:
5 min.).
It is possible to:
- set the sounding duration (20 to 180 sec.),
- set the strobe activation duration (1 to 15 min.),
- delay siren triggering (0 to 60 sec.).
Part No: 401-21: Siren
423-21 : Strobe-Siren
|
|
|
REMOTE
KEYPAD |
|
Using the remote keypad
you can control your protection system from both inside and outside
the protected premises.
Access codes ensure use of the device is secure
6 configurable control keys for the followingfunctions
(each control key can be configured for coded or direct access):
- intrusion protection arming/disarmingcommands,
- manual triggering of alarms (panic alarms, firealarms),
- chime function.
-Protection against attempts to find the access
codes
If an attempt to discover the access code is detected following
several codes being entered
one after the other, the keypad will be automatically blocked for
a determined period of time.
-Protection of intrusion protection commands
An exclusive anti-tamper process (based on code scrambling) foils
any attempt to reproduce the system arming/disarming messages.
Part No: 626-21W |
|
|
COMMUNICATION
SOFTWARE |
|
Transload is the system's
uploading/downloading software.
Designed to be user-friendly and Windows* compatible, it is used
to configure and maintain the system either locally on the site
or remotely via the PSTN telephone network.
It is a highly responsive and flexible tool.
Part No: 810-21X
|
|
|
|
|
|