Power over Ethernet (PoE) Products

Μενού TRENDnet


 
TPE-111GI
Gigabit Power over Ethernet (PoE) Injector
Power Over Ethernet (PoE) Injector for 10/100/1000T deliver power up to 100 meters (328ft)
Network devices at Gigabit speeds all within a compact device
Easy install PoE devices where a power outlet is not available
Reduce installation and network equipment costs
Safeguards network devices with short circuit protection
Plug and Play in remote location
Light weight and compact size
IEEE 802.3ab and 802.3af PoE compliant
Supplies Power to PD up to 15.5 Watts
3-years limited warranty
Data Sheet

Use non-PoE switches to network PoE devices at distances of up to 100 meters (328 feet)
Save on installation and equipment costs
Create an integrated PoE and non-PoE Gigabit network .

 

TPE-112GS
Gigabit Power over Ethernet (PoE) Splitter
Splits a networked PoE signal into separate power and Gigabit data sources
Network a Power over Ethernet (PoE) Ethernet cable to a non PoE device
Network devices at Gigabit speeds all within a compact device
Automatically detects PoE terminals and supplies inline power
Easily install non-PoE devices where a power outlet is not available
Reduce installation and network equipment costs
Safeguards network device with short circuit protection
Adjustable output DIP switch 5V, 7.5V, 9V, and 12V adjustable output
Converts Non-PoE devices with Power Over Ethernet Support
Auto-sensing power drawn from 802.3af power source equipment(PSE) devices
Supplies power up to 15.5 watts
Light weight and compact size
3-years limited warranty.
Data Sheet

Splits a networked PoE signal into separate power and Gigabit data sources
Use this compact device with TRENDnet PoE switches
Save on installation and equipment costs while utilizing Gigabit speeds

 

TEW-638PAP
300Mbps Wireless N PoE Access Point
IEEE 802.3af Power over Ethernet (PoE) compliant device (power adapter included for non-PoE installations)
Compliant with wireless IEEE 802.11n/g/b standards
Up to a 300Mbps data rate using an 802.11n connection
Works as a wireless adapter with AP Client support
Expand a wireless network using Wireless Distribution System (WDS)
802.11e Wi-Fi Multimedia (WMM) QoS data prioritization
Low interference and high susceptibility deliver reliable performance
2 detachable antennas and MIMO antenna technology provide high speed performance and expansive coverage
Wi-Fi Protected Setup (WPS) integrates other WPS devices into your network quickly
Multiple SSID in Access Point mode
On/off power switch
Advanced wireless encryption: 64/128-bit WEP, WPA/WPA2-RADIUS, and WPA/WPA2-PSK
Coverage up to 100 meters (328ft.) indoor and 300 meters (984ft.) outdoor*
3-year limited warranty
Data Sheet

No need to install this access point near a power source, power and data are received through a single Ethernet cable
Features Access Point Client mode, Wireless Distribution System (WDS) support, and detachable antennas
Quickly connect wireless clients with one-touch Wi-Fi Protected Setup (WPS)
Advanced wireless encryption and Wireless Multimedia (WMM) QoS technology

 

TEW-434APB
54Mbps Wireless G PoE Access Point
  Operates as Access Point, AP Client, WDS Wireless Bridging, or Repeater modes
Power over Ethernet (PoE) IEEE 802.3af support
Provides Security with 64/128-Bit WEP,WPA/WPA2 and WPA-PSK/WPA2-PSK
WDS Security supports 64/128-Bit WEP, WPA-PSK/WPS2-PSK
Supports 802.1x Authentication and MAC Address Control for Authorization Access (20 entries)
Allow users to Disable ESSID Broadcast to Increase Wireless Security
Built-in 10/100Mbps Auto-Sensing Fast Ethernet PoE Port
Dynamic Data Rate Scaling at 54, 48, 36, 24, 18, 12, 9 and 6 Mbps for 802.11g
Dynamic Data Rate Scaling at 11, 5.5, 2 and 1 Mbps for 802.11b
Allow Auto Fallback Data Rate for Optimized Reliability, Throughput and Transmission Range
2dBi Detachable Diversity Antenna. Replace with Optional High-Gain Antenna to Extend the Range/Coverage Area.
Easy Configuration and Maintenance with Web Browser (HTTP)
Flash Memory for Firmware Upgrade and Save/Restore Settings
Supports Most Operating Systems, such as Windows 95/98/ME/NT/2000/XP, Unix and Mac
Distance coverage 50 to100 meters indoor, 100 to 300 meters outdoor depending on the environment
3-year limited warranty
Data Sheet

No power needed, power provided by the networked PoE Ethernet cable
Proven wireless g performance and reliability
Functional Access Point, AP Client, Bridging (WDS) or Repeater modes provide network flexibility
Advanced wireless encryption ensures data security .

 

TPE-S44
8-Port 10/100Mbps PoE Switch (4 PoE, 4 Non-PoE)
IEEE 802.3af Power over Ethernet (PoE) Standard Compliant
8 x 10/100Mbps Auto-Negotiation and Auto-MDIX Fast Ethernet RJ45 Ports
Built-in 4 PoE Ports (Port 1 ~ Port 4)
Supports PoE Power Maximum 15.4 watts for each POE port
Supports PoE Powered Device (PD) classification identify
Full Wire-Speed Non-Blocking Reception and Transmission
Store and Forward Switching Method
96Kbytes RAM Data Buffer and 1K entries MAC Address Table
Extensive Diagnostic LED/s on the Front Panel
IEEE 802.3x Flow Control for Full-Duplex Mode; Back Pressure Flow Control for Half-Duplex Mode
3-year limited warranty
Data Sheet

TPE-S44 8-Port Smart Switch integrates Power over Ethernet (PoE) and network management features into a cost effective and scalable solution. The TPE-S44 reduces equipment cost by delivering data and power over existing network cable infrastructure..

 

TPE-S80
8-Port 10/100Mbps PoE Switch
IEEE 802.3af Power over Ethernet (PoE) compliant
8 x 10/100Mbps Auto-MDIX RJ-45 PoE ports
On/Off power switch
Provides 15.4 watts per PoE port
Supports PoE Powered Device (PD) classification
1.6Gbps switching fabric
Full wire-speed non-blocking reception and transmission
Store-and-forward switching method
Back pressure Flow Control for half-duplex mode
IEEE 802.3x Flow Control for full-duplex mode
512Kbits RAM Data Buffer and 1K MAC address entries
Diagnostic LEDs (Power, Link/Activity, PoE Act/Status)
Plug and Play
Sturdy metal enclosure
Mounting hardware included
3-year limited warranty
Data Sheet

Reduces equipment cost by delivering data and power over existing network cables
8 x 10/100Mbps Full Duplex PoE ports 1.6Gbps switching capacity
Use with TRENDnet's PoE Splitter to network and power non-PoE devices.

 

TV-IP512P
ProView PoE Internet Camera

IWorks with IEEE 802.3af PoE compliant devices
16x digital zoom
1x 10/100Mbps Fast Ethernet PoE port
Input/Output ports to network alarm systems and other devices
High quality MPEG-4 and MJPEG video recording with up to 30 frames per second
Resolution up to VGA: 640 x 480 pixels
1x removable 6mm, F1.8, CS Mount Lens
Included wall and ceiling mounting hardware
Manage up to 20 user profiles
Hear and talk to people in your camera’s viewing field through your computer
Supports TCP/IP networking, SMTP Email*, HTTP, Samba and other Internet protocols
Built-in SD card slot allows you to store still images or video directly onto a SD memory card**
Record streaming video to your computer, SD card or network storage devices
Motion detection triggered email alerts and image upload via FTP
Multiple adjustable motion detection windows with just-in-time snapshot
Quick Universal Plug and Play (UPnP) installation
Complimentary IPView Pro 2.0 software: manage up of up to 32 cameras ***
3-year limited warranty
* Support SSL with complimentary software
** SD memory card sold separately
*** Monitoring multiple cameras may require a high performance CPU
Data Sheet

No need to install this camera near a power source, power and data are received through a single Ethernet cable
View streaming video, hear sounds and record from any Internet connection
Program motion detection recording, email* alerts and more with complimentary software
Features a removable lens, I/O ports and 2-way audio .

 
Προϊόντα - Υπηρεσίες - Εταιρία - Επικοινωνία - Αρχική Ελληνικά -/- English